Wave Pegboard Storage Shelf for IKEA SKÅDIS & 1/4-Inch Pegboards

Turn unused pegboard space into colorful, easy-to-reach storage. This low-profile shelf combines a practical raised edge with MakersFind's wave-inspired front detail, keeping small desk, craft and everyday essentials organized without hiding them from view.

Why you'll love it

• Four useful lengths: choose the size that fits your tools and available pegboard space.
• Low raised edge: helps contain small items while keeping them easy to see and grab.
• Modular layout: mix sizes and colors or place multiple shelves side by side.
• Easy installation: fit the connector hooks to the board, align the shelf slots and slide the shelf down.
• Flexible storage: suitable for stationery, sewing notions, clips, small tools, cosmetics, desk accessories and lightweight display items.

Size guide

Size refers to shelf length. Width and height stay the same across all four options.

• S: 3.15 × 3.31 × 1.57 in (80 × 84 × 40 mm)
• M: 4.72 × 3.31 × 1.57 in (120 × 84 × 40 mm)
• L: 6.30 × 3.31 × 1.57 in (160 × 84 × 40 mm)
• XL: 7.87 × 3.31 × 1.57 in (200 × 84 × 40 mm)

Check the dimensions against the items you plan to store before selecting a size. No load rating is stated; use only for lightweight items and confirm that your pegboard is securely mounted.

Pegboard compatibility

• IKEA SKÅDIS
• 1/4-inch metal pegboard with panel thickness up to 1.2 mm
• 1/4-inch wood/MDF pegboard with panel thickness up to 6.35 mm

Select the correct pegboard type when ordering. Multiple shelves can align closely on IKEA SKÅDIS; the hole spacing on 1/4-inch pegboards does not support the same seamless side-by-side alignment. Pegboard dimensions vary by brand, so measure the panel around the holes before purchase.

What's included

• 1 × wave pegboard storage shelf in the selected size and color
• Connector hardware for the selected pegboard type

Pegboard and display items are not included.

Color options

Available in 26 MakersFind colors. The product supplied follows the selected color option. Screen settings, lighting and print batches may cause slight color differences.

Material & care

3D-printed PLA for indoor use. The layered texture and small surface variations are normal characteristics of the manufacturing process. Wipe clean with a soft, damp cloth. Keep away from open flames, direct high heat and temperatures above 50°C / 122°F.

Independent accessory

This is an independently designed accessory compatible with the pegboard systems listed above. IKEA and SKÅDIS are trademarks of their respective owner. MakersFind is not affiliated with or endorsed by IKEA.